2" Quick Change Flap Discs | Type S | 40 Grit Ceramic | LVA FD2-40CS

2" Quick Change Flap Discs | Type S | 40 Grit Ceramic | LVA FD2-40CS

These flap discs are manufactured using premium VSM Ceramic cloth. The VSM material is superior due to its uniform particle size and premium blend of ingredients. In addition, all discs are manufactured on computer controlled machines and subject to numerous tests which ensure high quality and greater safety.

Primary Advantages of Quick Change Ceramic Flap Discs

• Quick Change Flap Discs last 10 to 20 times longer than traditional coated abrasive roloc discs.
• Quick Change Flap Discs allow access to small surface areas such as corners and deep narrow channels.
• Quick Change Flap Discs grind cooler and result in less loading and glazing than standard discs.
• Quick Change Flap Discs grind cooler and result in less loading and glazing than standard discs.
• Ceramic Flap Discs out perform traditional zirconia flap discs by 50% on stainless steel, carbon steel allots and exotic metal
• Ceramic Flap Discs require less pressure for excessive stock removal.
• Ceramic Flap Discs last longer and reduce downtime for disc change over.
• Ceramic Flap Discs come in a red color for high visibility
• Ceramic Flap Discs have self sharpening grains which result in a consistent finish throughout the life of the disc.
• Ceramic Flap Discs run cooler than zirconia and aluminum oxide flap discs reducing heat build up.
• Ceramic Flap Discs reduce work hardening on heat-sensitive materials

Primary Advantages of Flap Discs

• Flap discs grind and finish at the same time, saving both time and money.
• Flap discs remove material aggresively. Its removal power is equal to depressed cool center wheel but it works safer and offers a better finished surface.
• Flap discs have a lightweight design to reduce operator fatigue.
• Flap discs are easy to use and requires very little surface pressure. Its especially cool cutting permits light contouring and avoids burning work-pieces by overheating.
• Flap discs last up to 30 times longer than conventional fibre discs due to their overlapping flap construction.
• Flap discs assure consistent performance as new particles are continually exposed during the life of the product.
• Flap discs, due to their tough construction, allows for aggresive edge grinding.
• Flap discs in conical shape enables the fullest contact between work-piece and disc surface.